Hydraulic Directional Valve
Ningbo Zhenhai Finotek Machinery Co.,Ltd is one of the leading China hydraulic directional valve manufacturers and suppliers in China, welcome to buy or wholesale customized bulk hydraulic solenoid directional valve from our factory.
Hydraulic directional valve consists of valve housing, valve spool, springs, O-rings, moisture solenoids with dirt resistant (Including coil and tube), and indicating LED hydraulic signal light, the solenoid is often attached with manual override, plastic plug or central electrical junction box and parts of bolt kits. The solenoid is wet armature impact with and cushioned, there is lower noise and longer service of solenoids, because of no pushpin seal in the valve housing, therefore, no wear or inner leakage for longer service life of hydraulic directional valve.
Finotek hydraulic directional valve is designed with maximum insulation protection of solenoid (Class IP65 protection), and prevention from moisture and dirt as well. Our hydraulic direction valve is standard modular mounting dimensions conforms to NFPA size of D03, D05, WE6, WE10, NG6, NG10 series, easily maintenance and replacement to other brand.
Specifications of Hydraulic Directional Valve:
Power: By hydraulic oil
Brand: Finotek or OEM
Max. Operation Pressure(T): 21Mpa
Max. Operating Pressure(P,A,B): 31.5Mpa
Max. Flow Rate: WE6: 60L/min. ~ WE10: 120L/min.
Media Temperature: -30 to +80(°C) for NBR O-rings
Available Voltage: C:12V,24V ; AC:110V,220V
Voltage Tolerance: +10% to -15%
Switching Frequency: DC:15000Times/h; AC:7200Times/h
Oil Medium: Mineral oil as per DIN51 524, VDMA 24 568 or rapeseed oil, Viscosity 10 – 400 CST
Recommended Medium Filtration: ISO 4406 Standard, cleanliness class:20/18/15